Automatic Bottle Blowing Machine (BM-A4)
Characteristics:
BM-A4 Full automatic Plastic Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes. Bottle Blowing Machine is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of Plastic Bottle Making Machine:
1). Plastic Bottle Making Machine has Stable performance with advanced PLC.
2). Plastic Bottle Making Machine has Automatic preform conveyer to save human cost.
3). Plastic Bottle Making Machine has Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the water bottle shaping rate, increase the production.
4). Plastic Bottle Making Machine has High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). Plastic Bottle Making Machine has High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Plastic Bottle Making Machine Introduce air cylinder to avoid contamination and noise.
7). Plastic Bottle Making Machine is Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Plastic Bottle Making Machine has Strong clamping force with high pressure and double crank links to lock the mould.
9). Plastic Bottle Making Machine has Safe, reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
10). Plastic Bottle Making Machine has Ideal cooling system make the finished bottles without any flaws.
| Model |
RM-4000D Plastic Bottle Making Machine |
| Productivity |
Depend on bottle design |
3200-4000PCS/H |
| Product type |
Body diameter |
20mm-100mm |
| Height |
50mm-350mm |
| Neck diameter |
15mm-38mm |
| Mold |
Cavity |
4cavities |
| Mold thick |
240mm |
| Mold |
500*500mm |
| Main machine power |
Electrical source power |
380v 3Phase /220v 3Phase 50/60HZ |
| Rated Power |
49kw |
| Really use power |
14kw |
| Air source |
LP air compressor |
1.6m3/min 1.0MPa 1set (15KW) |
| HP air compressor |
1.0m3/min 3.0MPa 2sets (each set 11KW) |
| Air dryer |
2.0m3/min 3.0MPa 1set |
| Cooling water |
Cooling water |
15L/min |
| Size |
L*W*H |
1908*1858*1920mm |
| Weight |
3600kg |
| preform unscrambler |
L*W*H |
2000*950*2480mm |
| Weight |
250kg |
| Resin available |
|
PET |
){kind=link}