LP-Model Push type unscrambler are national advanced bottle unscrambler, which are based on world advanced technology.
A. Brief instruction:
LP-Model Push type unscrambler are national advanced bottle unscrambling equipment, which are based on world advanced technology, designed and developed according to our country's developing trend of high speed and automation of drink's filling equipment.
The main machine has cylinder appearance with adjustable feet at the bottom for changing machine's height and level. In the cylinder, there is a rotating cylinder, and outside of rotating cylinder, there is the dropping bottle slot, the inner side is equipped with lifting device, which the amount is the same with dropping bottle slots. At the center of machine, there is a fixed umbrella shape tower. When the lifting device send out short of bottle message according to the bottle detecting device on the tower, bottle will drop onto umbrella shape tower from top center of the machine, then enter lifting device from the edge of tower. Under the action of cam, the lifting device pushes bottle into the bottle slot. After unscrambling in the slot, the bottle rotates along with bottle slot to the exit of unscrambler. The poking bottle starwheel at the exit will push the bottle into air convey way. The starwheel joins shaft of main motor through time geared belt.
Automatic Plastic Bottle Sorting Machine
The machine is used in ordering disordered polyeter bottles, the disordered bottles are carried into the storing bottle Section of the ordering bottle machine, with the help of the pushing force of the rotating disk, the bottle are ordered into Bottle mouth-up-position and are carried into the next process with the air-transfering type conveying bottle system. High speed operatin, easy to combine with all kinds of filler or filling prodution line.
1) Suitable for unscrambling disordered polyester bottles
2) Aligns bottles and discharges them by vacuum conveyor
3) PLC program controlled
5) High speed operation
6) Easy to combine with all kinds of fillers or filling production linesTechnical parameter:
|Production capacity (500ml)||28,000-30,000B/H|
|Suitable bottle specification||Diameter,φ40-100 Height: 150-320mm|
|Gas source pressure||0.7Mpa|
|Main motor power||4Kw|
|Bottle elevator power||0.75Kw|
|Bottle loading conveyor||5-6M|
|Overall dimension (L x B x H)||Φ3400 x 2650mm|