Semi Automatic Pet Blow Molding Machine
1. Suitable for PET bottle
2. Max volume: 5L
3. Max capacity: 1600BPH
4. CE
Application:
This semi automatic blow molding machine is for blowing PET beverage bottle, cosmetic bottle, medicine bottle, jar etc.
Bottle Blowing Device
The two sets of bottle blowing device are placed at the upper and front part of this semi automatic blow molding machine. They are composed of a extending bar cylinder, a bottle-mouth press cylinder, blowing and pressing lump, extending bar and more components. When the compressed air comes in, the pistons of extending bar cylinder and bottle-mouth pressing cylinder goes down at the same time. The blowing and pressing lump adjusts according to the height of the bottle mouth and presses the bottle mouth tightly. This ensures no air leakage from the bottle mouth and a crystal bright PET bottle is thus produced.
Mould-closing Device
It is located in the middle part of the semi automatic blow molding machine and is composed of a mould-closing cylinder, a moving template and a fixed template. The two halves of the mould are fixed on the fixed template and the moving template respectively. The mould-closing device is driven by the reciprocating
Motion of the cylinder rod, connection plate, and the adjusting screw to carry out opening and closing of the mould.
Operation Part
The operation part of this semi automatic blow molding machine is located at the right front. It is equipped with an electric control box, where all the electric devices are installed. On the operation panel, there are key switches, power lamps, a manual and a semi-automatic switch, lifting and descending keys, blowing keys and more keys. This provides easy operation to the user.
Air Passage System
This semi automatic blow molding machine is equipped with an air compressor to supply air to the machine. This machine has two 2-position 5-way electromagnetic valves which control the opening and closing of the mould, the ascending and descending of the extending bar, and the ascending and descending of the
Bottle-mouth pressing cylinder piston. Two 2-position 2-way electromagnetic valves are adopted to control the air blowing and discharge of the mould.
Configuration:
PLC: MITSUBISHI
Interface & touch screen: MITSUBISHI or HITECH
Solenoid: BURKERT or EASUN
Pneumatic cylinder: FESTO or LINGTONG
Filter regulator/lubricator combination: FESTO or SHAKO
Electric component: SCHNEIDER or DELIXI
Sensor: OMRON or DELIXI
Inverter: ABB or DELIXI or DONGYUAN
Paramter:
| Item |
Unit |
BM-S2 |
BM-S2A |
BM-S5 |
BM-S5A |
BM-S20 |
| Max.Production Capacity |
BPH |
600-800 |
1000-1600 |
300-400 |
600-700 |
600-800 |
1200-1400 |
40-45 |
| Max.Volume of Bottle |
L |
2 |
5 |
2 |
5 |
2 |
20 |
| Max.Diameter of Bottle |
mm |
Φ105 |
Φ190 |
Φ110 |
Φ190 |
Φ110 |
Φ280 |
| Max.Height of Bottle |
mm |
330 |
350 |
350 |
350 |
350 |
520 |
| Blow Mold Cavity |
pcs |
2 |
1 |
2 |
1 |
2 |
1 |
| Blow Mold Thickness |
mm |
156 |
260 |
360 |
| Mouth Size |
mm |
Φ28-Φ63 |
Φ28-Φ130 |
~ |
| Opening Stroke |
mm |
135-150 |
230 |
390 |
| Max.Stretch Length |
mm |
325 |
330 |
540 |
| Heating Power |
KW |
4.2 |
8 |
8 |
| General Power |
KW |
11.2 |
15 |
8 |
| Air Pressure |
Mpa |
0.8 |
0.8 |
0.8 |
| Max.Blow Air Pressure |
Mpa |
3 |
3 |
3 |
| Main Machine Dimension(L*W*H) |
m |
1.06*0.54*1.6(*2) |
1.7*0.7*2.19(*2) |
2.4*0.84*2.86 |
| Oven Dimension(L*W*H) |
m |
1.6*0.68*1.62 |
1.73*0.68*1.62 |
1.44*0.86*1.51 |
| Main Machine Net Weight |
kg |
350 |
700 |
1000 |
2000 |
2800 |
| Oven Unit Net Weight |
kg |
200 |
350 |
1000 |
){kind=link}